Dimensions Guide

Mud Guard
Notes
Technical Information
Bath and handshower outlets required for
two-way transfer valve.
All product dimensions are nominal.
Bath, handshower, and auxiliary outlets required
for three-way transfer valve.
When used as a two-way transfer valve (bath and
handshower), the installer must cap the auxiliary
outlet. Do not install spouts with flow restrictors
or shower units on the bath outlet.
* For installation on cast iron baths, collar should
be installed with flange facing downward. Opening
in cast iron must be Ø 1-7/8" (48 mm) minimum.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2017 05:28
Deck-mount Transfer Valve
K-409-K