How to Guide

Product Information
Applicable product:
Elongated bowl toilet K-4368
Elongated bowl toilet with 4 bolt holes in
base
K-4368-B
Elongated bowl toilet with bedpan lugs K-4368-L
Fixture:
Configuration Top spud,
elongated
Water per flush 1.6 gal (6 L)*
Spud size 1-1/2″
Passageway 2-1/4″ (57 mm)
Water area 11-3/8″ (289 mm) x
10-3/8″ (264 mm)
Water depth from rim 6″ (152 mm)
Seat post hole centers 5-1/2″ (140 mm)
Minimum static pressure required 35 psi (241.3 kPa)
Maximum static pressure 80 psi (551.6 kPa)
Minimum flowing pressure required 25 psi (172.4 kPa)
Required supply minimum 25 gpm (94.6 lpm)
* Designed to flush with 1.6 gal (6 L) of water when
installed with a 1.6 gpf (6 lpf) valve.
Included components:
Spud 18357
Bolt cap accessory pack 1013092
Installation Notes
Install this product according to the installation guide.
Refer to manufacturer and local codes for flushometer
requirements: for 12″ (305 mm) rough-in, sweat extension
nipple is required.
Will comply with the American Disabilities Act (ADA) when
installed per the requirements of the Accessibility Guidelines,
Section 604 Water Closets, of the Act. The Model Plumbing
Codes require the installation of elongated open-front toilet
seats in public bathrooms.
Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All
dimensions are nominal.
C
L of Outlet
27-5/8" (702 mm) or
29-5/8" (752 mm)
26" (660 mm)
2" (51 mm)
6-3/8"
(162 mm)
2-1/4"
(57 mm) Min
1-1/2" Spud
10" (254 mm) or
12" (305 mm)
17-1/2"
(445 mm)
14-1/2" (368 mm)
Front of Bowl
14-11/16"
(373 mm)
5-5/8"
(143 mm)
9-3/4"
(248 mm)
Roughing-In
K-4368
HIGHCLIFF
TM
BOWL
HIGHCLIFFTM BOWL
112560-1-
CG