User Guide

Tools and Materials

Before You Begin

NOTICE: Leave the cap on the diverter until the spout from the

bath faucet trim is ready to be installed. The diverter is an O-ring

sealing surface which may be damaged when unprotected.

NOTE: This product is for ﬁnished deck-mount or ﬁnished

rim-mount installations only.

NOTE: Instructions are given for installations with 8″ (20.3 cm)

centers. For wider installations, adjust all roughing-in dimensions

and copper tube lengths accordingly.

NOTE: The installation of water hammer arrestors are not required,

but are recommended. Installing water hammer arrestors may

reduce or eliminate the possibility of water hammer when the user

turns the handles to the ON or OFF position.

Observe all local plumbing and building codes.

Shut off the water supply.

Protect the surface of the deck/rim during the installation.

Products purchased separately may change valve placement and

alignment.

Provide an access panel to the valves for servicing.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Adjustable

Wrench

Pipe

Wrench

Hacksaw or

Tubing Cutter

Propane

Torch

Solder

Cloth Towel

5/8" OD

Copper Tubing

(1/2" Nominal)

1054252-2-C 2 Kohler Co.