Specification

Valiant
™
Comfort Height
®
The Complete Solution
®
two-piece elongated toilet
K-45927
Do not use a
double sanitary tee.
Use a 45° double
wye fitting.
For Back-to-Back Toilet Installations
Front of Bowl
L of Outlet
C
1-3/4"
(44 mm)
11"
(279 mm)
15-7/8"
(403 mm)
31-1/2"
(800 mm)
8"
(203 mm)
6"
(152 mm)
12"
(305 mm)
1"
(25 mm)
14-3/16"
(360 mm)
16-3/8"
(416 mm)
16-1/2"
(419 mm)
8-5/16"
(211 mm)
29-7/8" (759 mm)
2-3/4"
(70 mm)
9-3/4"
(248 mm)
Technical Information
All product dimensions are nominal.
Toilet type: Two-piece, Floor-mount
Waste Outlet: Floor
Bowl shape: Elongated
Flush type: Gravity siphon jet, Revolution 360
®
Trap passageway: 2-1/8" (54 mm)
Water Consumption
Full: 1.28 gpf (4.8 lpf)
Water surface size: 9-3/4" x 7-1/4" (248 mm x 184 mm)
Rim to water
surface:
5-3/8" (137 mm)
Rough-in: 12" (305 mm)
Fixture Supply Requirements
Min static pressure: 15 psi (103.4 kPa)
Max static pressure: 80 psi (551.6 kPa)
Notes
Install this product according to the installation
instructions.
For back-to-back installations, the toilet shall
be connected to the vertical stack using one
of the three following fittings: double fixture
fitting, double combination wye and 1/8 bends,
or double wye and 1/8 bends.
ADA, OBC, CSA B651 compliant when
installed to the specific requirements of these
regulations.
Plumbing codes may require elongated toilets
and elongated, open-front seats in public
bathrooms.
Accessibility standards may require controls to
be located on the open side of the toilet.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.