Installation Guide

TP-6809 6/15 13Section 1 Installation Instructions
D Lifting should only be conducted by those trained and
experienced in lifting and rigging to achieve a safe
and effective lift. Consideration needs to be given to,
but not necessarily limited to the following items:
d Weight and center of gravity of the equipment
being lifted
d Weight and center of gravity of the lifting device
d Boom angles
d Selection of rated rigging
d Stability of lifting foundation
d Wind and weather conditions
d Local or regional codes that may require or restrict
types of rigging.
The distributor/lifting contractor should choose one of
the following methods to lift the generator set depending
upon the location circumstances and the generator set’s
weight and size.
Single Spreader Bar and Skid Lifting Bar Method
RefertoFigure1-3.
Double Spreader Bar and Skid Lifting Bar Method
RefertoFigure1-4.
1. Lifting holes
1
ADV--8494
1
Figure 1-2 Typical Enclosure with Lifting Holes
TP-5700-2/L10
Figure 1-3 Single Spreader Bar and Skid Lifting Bar
Method (enclosure not shown)
TP-5700-2/L11
Figure 1-4 Double Spreader Bar and Skid Lifting
Bar Method (enclosure not shown)