Product Manual

TP-7102 4/18 9Introduction
Introduction
This manual provides operation instructions for Model
48RCLB and 60RCLA residential/light commercial
generator sets equipped with the RDC2 generator
set/transfer switch controller.
This generator set is approved for use in stationary
applications in locations served by a reliable utility
power source. Have the generator set installed by an
authorized Kohler distributor/dealer or service
technician. Refer to the Installation Manual for
installation instructions.
Information in this publication represents data a vailable
at the time of print. Kohler Co. reserves the right to
change this publication and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The equipment maintenance requirements are very
important for safe and efficient operation. Inspect the
parts often and perform required maintenance at the
prescribed intervals. Obtain service from an authorized
Kohler distributor/ dealer or service technician to keep
equipment in top condition.
Figure 1 Model 48RCLB Generator Set
Nameplate
Figure 2 shows a typical generator set nameplate.
Copy the model, serial, and specification numbers from
the nameplate into the spaces provided in the product
information section on the inside front cover of this
manual. See the service view in Section 1 for the
nameplate location.
Service Duty
Voltage
Alt Model
Insulation
MFG Date
Amps
Phase
RPM
Battery
Fuel
kW
kVA
Hz
Genset Model
Spec Number
Serial Number
Material Number
PF
Figure 2 Nameplate, Typical