Engine Manual
Table Of Contents
- Safety Precautions and Instructions
- Introduction
- Service Assistance
- Section 1. Components and Maintenance Locations
- Section 2. Operation
- Section 3. Maintenance
- Section 4. Troubleshooting
- Section 5. Storage
- Section 6. Specifications
38 TP-7095 4/18
Check drive belt condition:
1. Stop the engine and allow it to cool.
2. Locate the drive belt. See Figure 19.
Figure 19 Drive Belt Location
3. Inspect the drive belt. Look for signs of cracking, separation, cuts, or other damage. See Figure 20.
4. If any abnormality is found, replace the drive belt.
Figure 20 Drive Belt Damage
Drive belt