Dimensions Guide

2-11/16"
Notes
Required Electrical Service
Install this product according to the installation
guide.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
If used for bath-shower system, the bath spout
must be connected to the #1 outlet port.
120 V, 15 A, 60 Hz
Technical Information
Provide access for servicing valve.
All product dimensions are nominal.
Use 1/2" supply lines.
Shower Valve:
Do not install this valve in walls exposed to
subfreezing temperatures.
13 gal/min (49.2 l/min)Flow rate - Max:
45 psi (3.1 bar)Pressure - Max:
Avoid mounting the valve in a wall adjacent to a
frequently occupied room.
Pressure regulators are recommended in
applications where large pressure swings are
anticipated or pressure differences between the
supplies exist.
Water hammer arrestors and shut-offs are
required in both the hot and cold supplies.
Shower drain capacity must meet the shower
system flow rate.
Locate a GFCI-protected 120 V, 15 A, grounded
electrical outlet within close proximity of the valve.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2017 05:52
DTV+
®
Digital 2 Port Thermostatic Valve
K-528-K