Installation Guide

Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
•
Always test your cleaning solution on an inconspicuous area
before applying to the entire surface.
•
Wipe surfaces clean and rinse completely with water immediately
after applying cleaner. Rinse and dry any overspray that lands on
nearby surfaces.
•
Do not allow cleaners to soak on surfaces.
•
Use a soft, dampened sponge or cloth. Never use an abrasive
material such as a brush or scouring pad to clean surfaces.
For detailed cleaning information and products to consider, visit
www.kohler.com/clean. To order Care & Cleaning information, call
1-800-456-4537.
Troubleshooting
NOTE: For DTV+ system troubleshooting, refer to the guide on
the K-99695 controller product page at www.us.kohler.com.
NOTE: For service parts information, visit your product page at
www.kohler.com/serviceparts.
This troubleshooting guide is for general aid only. For service and
installation issues and concerns, call 1-800-4KOHLER.
Symptoms Probable Causes Recommended Action
1. Error 0140 is
displayed.
A. Tank water level is
too low (green
status light on
steam generator is
on).
A. Inspect the water
inlet screen and clean
if necessary. Ensure
the water supply
valve is on and that
water is being
supplied to the steam
generator.
B. Tank temperature
limit has been
exceeded (green
status light on
steam generator is
off).
B. Call the Customer
Care Center using
the information
provided on the back
page of this manual.
Kohler Co. 15 1235393-2-C