Installation Guide

1. Preparation
NOTE: If desired, set up this installation to use two interfaces. One
interface, installed inside the shower, is required.
If not already installed, install the two- or three-port digital valve
according to the instructions packed with the product.
Determine the locations of all required components before
beginning installation.
Allow enough slack in the cables for drip loops.
Route the interface cable(s) to the interface installation location.
Complete the finished wall.
Coupler
Drip Loop
Drip
Loop
Power
Cord
Outlet
Interface
Interface
20' (6.1 m)
Cables
Outlets
Supply Inlets
1143086-2-G 4 Kohler Co.