Installation Guide

Tools and Materials
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
CAUTION: Risk of personal injury or product damage. Cast
iron sinks are very heavy. Get assistance lifting the sink into
place.
Observe all local plumbing and building codes.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protective carton until you are
ready to install it.
This sink is not intended for undercounter installation.
Inspect the drain and supply tubing. Replace if necessary.
If possible, assemble the faucet and strainer to the sink before
installing the sink.
To ensure a safe and damage-free installation, two people should
install the sink.
For a replacement installation, make sure the existing cut-out is
the same size or smaller than the cut-out for the new sink.
All information in these instructions is based on the latest product
information available at the time of publication. Kohler Co.
reserves the right to make changes at any time without notice.
Pencil
Drill
Scissors
Sealant
Keyhole/Compass
Saw
Tape
Measure
Safety
Glasses
• 1/2" or larger drill bit
• Rags or paper toweling
Plus:
1004605-2-F 2 Kohler Co.