Specification Sheet

22-1/4" (565 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
This valve should be used in shower systems
only and is not intended to be connected to bath
spouts unless installed in a DTV–Bath system.
Provide access for servicing valve.
Use 3/4" supply lines for optimum performance.
A hot water system equal to 80 gallons (102 L)
is recommended.
Pressure regulators are strongly recommended
in applications where large pressure swings are
anticipated or pressure differences between the
supplies exist.
Water hammer arrestors and shut-offs are
required in both the hot and cold supplies.
Drain requirements: The maximum flow rate of
the valve system is 21 gal/min (79.5 l/min) at 45
psi (310.3 kPa). Use a minimum 3" (76 mm)
single drain, minimum 2" (51 mm) multiple drains,
or a drain system capable of handling the
maximum flow rate.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-26-2018 02:25
DTV
®
Six-Port Thermostatic Valve
K-682-K