Product Manual
Table Of Contents
- Safety Precautions and Instructions
- Introduction
- Service Assistance
- Section 1. Descriptions and Service Views
- Section 2. Generator Set Operation
- Section 3. VSC Controller Operation
- 3.1 VSC Generator Set Controller
- 3.2 Control and Indicators
- 3.3 Controller Power
- 3.4 Battery Charging
- 3.5 Changing Settings
- 3.6 Setting the Exerciser
- 3.7 VSC Controller Menus
- 3.8 Main Menu
- 3.9 Overview Menu
- 3.10 Engine Metering Menu
- 3.11 Generator Metering Menu
- 3.12 Generator Set Information Menu
- 3.13 Genset Run Time Menu
- 3.14 Genset System Menu
- 3.15 Date and Time Menu
- 3.16 Networking Information Menus
- 3.17 Programmable Interface Module (PIM) Status Menu
- 3.18 Event Log
- Section 4. Scheduled Maintenance
- Section 5. Troubleshooting
- Appendix A. Abbreviations
TP-6843 12/21 49
3.16.3 RBUS Information
The RBUS Information menu contains settings for remote modules that communicate with the VSC controller using RBUS
protocol (see Figure 35).
Figure 35 VSC Information Submenu
Networking--->
Information
Networking--->
Status
Networking--->
Configuration
RBUS--->
Information
<---- Return
Modules
Connected: 3
Remote --->
Devices
Net Cycle Time:
123ms
Module Timeouts:
1234
Module Errors:
1234
<---- Return
RD
See the figure titled: Remote Devices
Submenu