Product Manual
Table Of Contents
- Safety Precautions and Instructions
- Introduction
- Service Assistance
- Section 1. Descriptions and Service Views
- Section 2. Generator Set Operation
- Section 3. VSC Controller Operation
- 3.1 VSC Generator Set Controller
- 3.2 Control and Indicators
- 3.3 Controller Power
- 3.4 Battery Charging
- 3.5 Changing Settings
- 3.6 Setting the Exerciser
- 3.7 VSC Controller Menus
- 3.8 Main Menu
- 3.9 Overview Menu
- 3.10 Engine Metering Menu
- 3.11 Generator Metering Menu
- 3.12 Generator Set Information Menu
- 3.13 Genset Run Time Menu
- 3.14 Genset System Menu
- 3.15 Date and Time Menu
- 3.16 Networking Information Menus
- 3.17 Programmable Interface Module (PIM) Status Menu
- 3.18 Event Log
- Section 4. Scheduled Maintenance
- Section 5. Troubleshooting
- Appendix A. Abbreviations
46 TP-6843 12/21
3.16 Networking Information Menus
Use the networking menus to view and adjust communication settings for systems with remote RBUS devices such as a PIM,
and for systems that use the Kohler
®
OnCue
®
Plus Generator Management System.
RBUS is a proprietary RS-485 communications protocol.
The Networking Information menu leads to submenus for network and RBUS communication settings. See Figure 32.
Figure 32 Networking Information Menu
Networking --->
Information
See the figure titled: Network Status
Submenu
Networking --->
Status
Networking --->
Configuration
RBUS --->
Information
<--- Return
RB
NC
NS
See the figure titled: Network
Configuration Submenu
See the figure titled: VSC Information
Submenu