Installation Guide

5. Install the Top Side Lite Bracket
IMPORTANT! The hinge pin cannot be removed once it has been inserted.
Apply a heavy bead of silicone sealant to the edge and bottom surfaces located on the inside slot of
the top side lite bracket.
Install the top side lite bracket by sliding the top bracket onto the side lite panel while inserting the
operating panel hinge pin into the top bracket hole.
Open the operating glass panel. Fill the hole with silicone sealant and press the retaining pin into
the hole located on the back of the top side lite bracket.
Top Side Lite Bracket
Hinge Pin
Retaining
Pin
Fill hole with silicone sealant
and insert the retaining pin.
Top Side Lite
Bracket
Bottom View (Looking Inside Top
Side Lite Bracket)
Apply a heavy bead of silicone
sealant to edge and bottom
surfaces on inside of the slot.
1011451-2-F 8 Kohler Co.