Installation Instructions

15. Assemble the Rollers
Triangle side up.
Bolt Gasket
Roller
Gasket
Wrench
Bolt
NOTICE: There is a triangle shape molded on one of the ats of the roller.
Orient the sliding door panel so that the handle holes are on the opening side of the shower.
Position the roller and gasket on the outside of the panel, and insert the roller cam into the hole.
Orient the roller so that the triangle is pointing up. This sets the door at its lowest position, making adjustments easier.
Firmly handtighten the roller to the glass with the gasket and bolt.
Position the provided wrench on the roller and a 3/4" socket wrench on the bolt.
Securely tighten the roller to the panel. The gasket may ex as the bolt is tightened.
Repeat these steps for the second roller.
Kohler Co. 19
1460483-2-B