Installation Instructions

Panel Adjustment and Maintenance
Tighten BoltAdjust Roller CamLoosen Bolt
NOTICE: The panels may require adjustment to ensure that they touch the top and boom bumpers in the proper closed
position.
To adjust the panels, loosen the roller bolt with a 3/4" socket wrench. Do not over-loosen!
Adjust the alignment of each end of the panel by turning the roller with the provided wrench.
Continue until the door operates smoothly, aligns evenly with the shower walls, and the door panels make contact
with the top and boom bumpers at the same time.
When complete, securely tighten the two roller bolts.
Maintenance
Check roller tightness annually.
Retain the provided wrench for future adjustment or retightening.
1460483-2-B
26 Kohler Co.