Installation Instructions

18. Install the Remaining Seals
Fin
Align the top of the cover with the top of the wall seal and press together.
Remove the adhesive backing from the sliding panel wall seal.
NOTE: The n on the L-shaped wall seal should face the interior of the shower.
Starting from the boom, rest the sliding panel wall seal on the boom bumper and press against the wall.
Verify that the wall seal is level and plumb.
NOTE: The sliding panel seal should sit above the boom bumper and below the top bumper when the sliding panel is
closed.
Press the sliding panel seal onto the end of the sliding panel glass closest to the showerhead.
1460483-2-B
22 Kohler Co.