Installation Instructions

9. Secure the Header
8-18 x 3/8"
CAUTION: Risk of personal injury. Position hands away from the drilling locations when drilling through the
header.
CAUTION: Risk of product damage. When securing the header to each wall bracket, do not drill through the
second wall of the header.
From inside the shower, drill a 9/64" hole through the rst wall of the header using the wall bracket as a template.
Repeat for the other side.
Secure the header to each wall bracket using a #8-18 x 3/8" self-drilling screw (provided).
Thoroughly clean the header. Make sure there is no debris in the roller tracks.
Slide each bumper ush against the wall until clicked onto the bracket.
Kohler Co. 13
1460483-2-B