Manualshelf

Installation Instructions

ManualsBrandsKohler ManualsBathElate™ 59-5/8"W x 56-3/4"H Matte Black Semi-Frameless Sliding Bathtub Shower Door with Clear Glass
11121314151617181920
10. Install the Threshold Seal
Indent
Notch
CAUTION: Risk of product damage. A notch is required on the bumper for the xed panel side only. An indent on
the inside top of the bumper indicates where the notch should be cut. Do not cut a notch in the bumper for the
sliding panel side.
NOTE: The xed panel should be installed on the opposite side of the showerhead.
Remove the xed panel side bumper.
Cut a notch in the xed panel side bumper along the indent on the inside top of the bumper.
Reinstall the xed panel side bumper.
Measure the boom length of the xed panel and subtract 5/8" (16 mm).
Mark the measurement on the threshold seal and cut to length.
Slide the threshold seal into the channel of the threshold and align the seal with the front of the bumper.
Press the remainder of the threshold seal into the groove on the threshold.
1460483-2-B
14 Kohler Co.