Installation Instructions

17. Install the Centerguide
IMPORTANT! The centerguide must be fully seated behind the threshold lip as shown.
Slide the door panel to the xed panel end of the shower.
Thread the screw partially into the centerguide hole. The screw should not protrude from the boom of the
centerguide.
Rotate the centerguide into place in the threshold groove, as shown.
Slide the door panel into the centerguide channel.
Shift the centerguide along the threshold until the edge of the guide is aligned with the edge of the xed panel.
Handtighten the screw with a 5/32" hex wrench, then tighten an additional one half turn.
Kohler Co. 21
1460483-2-B