Dimensions Guide

ManualsBrandsKOHLER ManualsTub & Shower Valves8304-KSL-NA

Features

•

Includes valve body, pressure balance cartridge, rough-in guide

and mud guard

•

1/2" Universal NPT & direct sweat inlets & outlets, with stops

•

Service stops supplied loose (not factory installed in valve body)

- ready for making sweat connections to valve inlets

•

Service stops include integral check valves

•

5.0 gpm (18.9 l/min) maximum flow rate at 45 psi

•

Single lever design cycles from off through cold to hot

•

Provides temperature regulation and automatic anti-scald

protection

•

One piece cartridge design simplifies installation and

maintenance

•

Adjustable high temperature limit stop to control maximum water

temperature

Codes/Standards

ASME A112.18.1/CSA B125.1

•

Requires valve trim to complete installation (sold separately).

ASSE 1016/ASME A112.1016/CSA B125.16

Material

KOHLER

Faucet Lifetime Limited

Warranty

•

Forged De-zincification Resistant Brass body provides long

term reliability and resistance to aggressive water conditions

See website for detailed warranty information.

Technology

•

Pressure-balancing diaphragm technology maintains outlet

temperature within +/- 3 degrees Fahrenheit during water

pressure fluctuations

Installation

•

Designed for use in standard, back to back and thin wall

installations

•

Valve body features integral mounting locations and symmetrical

valve inlets to simplify installation

•

Cartridge is reversible for installations where hot and cold

supplies are reversed.

•

Rough-in guide designed for both standard and thin wall

installations

•

Installed valve rough-in can be flushed and pressure tested to

150psi max (air or water) without cartridge, using K-10351 Test

Cap

Optional Accessories

K-10350 Deep Rough-In Kit For K-8305 Cartridges

K-10351 Test Cap For K-8300 Series Valve Bodies

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

2-3-2018 02:56

Rite-Temp

Valve Body & Cartridge Kit Complete

K-8304-KSL

Summary of content (2 pages)

PAGE 1
Rite-Temp® Rite-Temp® Valve Body & Cartridge Kit Complete K-8304-KSL Features • • • • • • • • • • Includes valve body, pressure balance cartridge, rough-in guide and mud guard 1/2" Universal NPT & direct sweat inlets & outlets, with stops Service stops supplied loose (not factory installed in valve body) - ready for making sweat connections to valve inlets Service stops include integral check valves 5.0 gpm (18.
PAGE 2
Rite-Temp® Rite-Temp® Valve Body & Cartridge Kit Complete K-8304-KSL Cutout for finished walls less than 3/4" (19 mm) Ø 4-1/2" (114 mm) Max Finished Wall Min Finished Wall Outlet Port 1/2"-14 NPT and 5/8" ID for 1/2" Nominal Copper Tubing 5-7/8" (149 mm) Ø 1" (25 mm) 1-15/16" (49 mm) Cut Line 7/8" (22 mm) 1-15/16" (49 mm) Outlet Port 9/16" (14 mm) 2-3/16" (56 mm) 2-3/4" (70 mm) 2-15/16" (75 mm) 3-1/2" (89 mm) Technical Information All product dimensions are nominal. Shower Valve: Min.