Dimensions Guide

Features
•
Cast iron with Safeguard
®
finish
•
Variable speed pump with 1.5 kW heater, back-lit
user keypad, and remote control
•
5 Flexjets
•
UL listed
•
Less all trim
•
ADA compliant when installed per Section 607 of the
Act
•
K-842-H2 - Drilled for K-9621 grab bars (required)
•
66″ (1676 mm) x 32″ (813 mm) x 18-1/4″ (464 mm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASME A112.19.1/CSA B45.2
•
ASME A112.19.7
•
CSA B45.10
•
CSA C22.2 No 218.2
•
UL 1795
•
ADA
•
ICC/ANSI A117.1
BATH WHIRLPOOL
K-842-H2
ALSO K-845-H2
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Accessories
•
CP: Polished Chrome
•
PB: Vibrant
®
Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
K-842-H2 Bath whirlpool with grab bars (shown) ❑ 0 ❑ Other_____
K-845-H2 Bath whirlpool, less grab bars ❑ 0 ❑ Other_____
Required Accessories
K-9621 Grab bars (pair) - required for K-842-H2 only ❑ CP ❑ PB ❑ Other_____
K-9695 Jet trim kit ❑ CP ❑ PB ❑ Other_____
Recommended Accessories
K-7161-TF Clearflo pop-up bath drain ❑ CP ❑ PB ❑ Other_____
Product Specification
The bath whirlpool shall be 66″ (1676 mm) in length, 32″ (813 mm) in width, and 18-1/4″ (464 mm) in height. Product shall be
made of cast iron with Safeguard
®
finish. Product shall have 5 Flexjets, a variable speed pump with 1.5 kW heater, and back-lit
user control. Product shall be ADA compliant when installed per Section 607 of the Act. Product shall be UL listed and less all
trim. K-842-H2 bath whirlpool shall be drilled for K-9621 grab bars (required). Bath whirlpool shall be Kohler Model
K-______-_______-_______.
MAESTROTM
Page 1 of 2
1019468-4-
F
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com