Dimensions Guide

30°
Notes
Technical Information
Measure your actual product for rough-in details.
All product dimensions are nominal.
Install this product according to the installation
instructions.
3-Wall AlcoveInstallation:
LeftDrain location:
The dimensions are applicable for this product
only and should not be used to fabricate
substitute bases for shower enclosures.
3-3/8" (86 mm)Drain hole diameter:
180 lbs (81.6 kg)Weight:
2-7/16" (62 mm)Minimum flat for door:
KOHLER steam generator/control kit is designed
for use with this product. Kohler Co. shall not be
4" (102 mm)Threshold height:
responsible for problems encountered due to the
installation and use of other manufacturer’s steam
generators.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-3-2018 03:08
Bellwether
®
Shower Base
K-9165