Installation Guide

1021774-2-B
3
Kohler Co.
Shelf
Screw
Bracket
Setscrew
Shower
Wall
Apply
Sealant
Wall Inserts
1. Shelf Installation
IMPORTANT: The wall inserts for the shelf brackets are installed in
the bath/shower wall at the factory.
- Apply a small amount of silicone sealant to the back of each bracket.
- Assemble the brackets and sockethead screws as shown.
- Use the hex wrench to install the bracket on the shower wall insert.
- Repeat for the other bracket.
- Remove any excess sealant from the brackets.
- Partially thread the setscrews into the brackets.
- Remove the prot ective paper backing from both sides of the shelf.
- Carefully slide the shelf into position in the bracket assembly recesses
and tighten the setscrews to secure the shelf to the brackets.