Installation Guide

Complete the Diverter Installation (cont.)
Install the diverter handle. Use a hex wrench to tighten the
setscrew.
6. Installation Checkout
Complete the installation of the valve, valve trim and any other
components according to the instructions packed with the
product.
Ensure all connections are tight.
Open the drain.
Turn on the main water supply and check for leaks. Repair as
needed.
Open both hot and cold valves and run water through the spout
(if installed) to remove debris. Check for leaks.
Confirm proper diverter operation.
Turn the valves to the closed position.
Kohler Co. 11 113228-2-CC