Instructions / Assembly

L of Outlet
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Flushometer, Floor-mountToilet type:
For back-to-back toilet installations: Use only a
45° double wye fitting.
FloorWaste Outlet:
Elongated frontBowl shape:
If Fixture Supply Pressure is below 35 psi static,
then fixture must be paired with a valve rated at
1.28 gpf or greater.
Flushometer valve siphonFlush type:
1-1/2", Inlet, TopSpud size:
2-1/8" (54 mm)Trap passageway:
Requires flushometer valve to match desired
water consumption 1.1 gpf (4.3 lpf) or 1.28 gpf
(4.8 lpf) or 1.6 gpf (6 lpf).
Water Consumption
1.1 gpf (4.3 lpf) or 1.28 gpf (4.8 lpf)
or 1.6 gpf (6 lpf)
Full:
10" x 7" (254 mm x 178 mm)Water surface size:
6" (152 mm)Rim to water surface:
12Rough-in:
5-1/2" (140 mm)Seat-mounting holes:
Fixture Supply Requirements
35 psi (241.3 kPa)Min static pressure:
80 psi (551.6 kPa)Max static pressure:
25 psi (172.4 kPa)Min flowing pressure:
25 gpm (94.6 lpm)Min flow rate:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-28-2018 15:20
Wellcomme
™
Ultra
Elongated Floor Mount, Flushometer Bowl
K-96053