Installation Guide


 2000 Kohler Co.
GRIP RAILS
 Position the grip rail so the setscrews are to the bottom.
 Press the grip rail fully onto the studs. Then push down-
ward on the grip rail so the narrow slots in the grip rail fit
over the grooves in the studs. Use a 3/32” ball style hex
wrench to securely tighten the grip rail setscrews. Make
sure the grip rail is secure.
 Repeat for the other grip rail.
1001107-2-A
Inside Bath Wall
Grip Rail
Stud
Setscrew
Under
Grip Rail
Setscrew
Under
Grip Rail
Stud