Installation Guide

8. Connect the Components
IMPORTANT! Make drip loops in all cables.
IMPORTANT! Make sure all cables fully click into the sockets.
Connect the interface cable(s) to the appropriate master (8-pin) or
accessory (4-pin) interface connector on the adapter.
If your system includes a steam generator and/or rain panel,
connect those cables to the appropriate 4-pin connector on the
adapter.
Connect the 6’ (1.8 m) data cable(s) to the adapter.
Accessory
Interface Cable
Master
Interface Cable
Rain Panel Cable
Steam Adapter Cable
Drip Loop
To
Controller
6' (1.8 m)
Data Cable
Kohler Co. 11 1256292-2-B