Installation Guide

2. Disconnect the Cables from the Module

IMPORTANT! Disconnect the power from the media module before

removing the access covers.

Remove the tall access cover on the media module.

Disconnect the valve cable and discard.

Disconnect the remaining cables.

Disconnect any speaker wires from the media module, then

reconnect them to the K-99696 ampliﬁer. Refer to the instructions

packed with the ampliﬁer.

If incandescent lighting is installed to the media module, remove

the small access cover, disconnect the hardwired lighting cable,

then reconnect to a light switch.

Remove the media module.

Lighting

Steam,

Rain Panel

Power

Cord

Speaker Wires

Valve

Cable

Ethernet

Interface

Cables

Disconnect power

before removing covers.

Kohler Co. 5 1256292-2-B