Installation Guide

3. Remove the Existing Interface
Attach the suction cup (provided) to the screen of the existing
interface.
Using the suction cup, remove the interface from the wall sleeve.
Carefully pull the cable through the hole in the wall sleeve and
out of the wall cavity.
Slide the cardboard retainer (provided with the DTV+ interface)
over the cable to prevent it from falling back though the hole in
the wall sleeve.
With the retainer in place, disconnect the interface cable from the
cable coming from the wall.
Suction Cup
Wall Sleeve
Retainer
Disconnect the
cable after the
retainer is in place.
1256293-2-B 6 Kohler Co.