Installation Guide

4. Install the Housing Assembly

CAUTION: Risk of product damage: Before proceeding, verify that

both ends of the original cable coming from the wall are

disconnected from any components.

Apply grease (provided with the DTV+ interface) into both ends

of the coupler.

Connect the 18″ (457 mm) retroﬁt cable and the interface cable to

the coupler. Make sure the cables fully click into the coupler.

Connect the other end of the retroﬁt cable to the cable from the

wall. Align the white arrows on the connectors and make sure

they fully engage.

Carefully feed the cables and coupler into the hole in the wall.

Firmly press the housing assembly into the wall sleeve until it

snaps in place.

Install the K-97171 or K-99702 conversion kit according to the

instructions packed with the products.

Coupler

18" (457 mm)

Retrofit Cable

Apply grease

in both ends.

Kohler Co. 7 1256293-2-B