Dimensions Guide

Features

•

For use with Refinia

freestanding bath fillers.

•

Can be installed without required freestanding bath filler.

Codes/Standards

ASME A112.18.1/CSA B125.1

KOHLER

Faucet Lifetime Limited

Warranty

See website for detailed warranty information.

USA/Canada: 1-800-4KOHLER (1-800-456-4537)

Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

7-28-2017 08:10

Refinia

Mounting-block

K-97342

PAGE 1
Refinia® Mounting-block K-97342 Features • • For use with Refinia® freestanding bath fillers. Can be installed without required freestanding bath filler. Codes/Standards ASME A112.18.1/CSA B125.1 KOHLER® Faucet Lifetime Limited Warranty See website for detailed warranty information. USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com.
PAGE 2
Refinia® Mounting-block K-97342 Ø 4-11/16" (119 mm) Technical Information All product dimensions are nominal. Notes Install this product according to the installation guide. Adequate floor support is required.The wood support must be a minimum of 2" (51 mm) thick by 6" (152 mm) wide. 2x6 lumber is NOT adequate for this application. Concrete can be used as the floor support. Requires 3/16" masonry drill bit and six 1/4" x 1-3/4" concrete screws, not included.