Specification

30"
Notes
Required Electrical Service
Install this product according to the installation
guide.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
To recess mount, the wall cavity must be framed
and the cabinet secured to framing studs. Reroute
120 V, 15 A, 60 HzOutlet, Lights:
Technical Information
electrical or water supply lines from the cavity.
All product dimensions are nominal.
Consult a professional if drain or vent piping is
encountered, or if the wall is load-bearing.
To determine the height of the cabinet, ensure
the door will clear all obstacles (such as a faucet).
A minimum 3" (76 mm) distance is required.
Cutout for recess-mount installations: 18-1/2"
(470 mm) wide x 28-1/4" (718 mm) high x
3-11/16" (94 mm) deep.
A dimmer switch is required. This product is
compatible with most residential dimmer switches
intended for incandescent and dimmable LED
bulbs.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
1-30-2017 03:28
Verdera
®
Lighted Mirrored Cabinet
K-99003-TL