Installation Guide

14. Install the Door
IMPORTANT! Never leave the door supported with only one hinge attached. Get assistance supporting
the door.
IMPORTANT! Make sure the cable does not get pinched when the cabinet door is closed.
NOTE: Reattach the top hinge first.
Align the hinges with the hinge holes in the side of the cabinet.
While supporting the door, secure the top hinge to the cabinet with the three screws.
Continue supporting the door while securing the bottom hinge with the three screws.
Align the tab on the end of the cable with the slot on the adapter at the bottom of the door.
Press the cable connector onto the adapter.
Align the tab on the cap with the slot on the adapter at the top of the door, then press in place.
Test opening and closing the door for smooth operation. Make sure the cable does not get pinched.
If the door binds, make adjustments to the hinges. Refer to the ″Adjust the Door″ section.
1267931-2-F 18 Kohler Co.