Installation Guide

11. Connect the Door Cable
Position the cable on the side of the power box that will be closest to the door.
Connect the door cable to the power supply connectors on the power box.
The cable should extend 4″ (102 mm) from the bottom of the power box. Coil any excess cable
inside the box.
Install the slotted grommet around the cable and into the slot on the back of the power box.
Install the plug in the remaining open slot on the back of the power box.
4"
(102 mm)
Position the cable
near the door.
Kohler Co. 15 1267931-2-F