Installation Guide

Before You Begin
CAUTION: Risk of personal injury. Mirrored cabinets are very heavy. Get assistance lifting the
cabinet.
CAUTION: Risk of electric shock. For surface-mount installation, side mirror kit K-99012 or wood
kit K-99675 is required to enclose exposed electrical wiring.
NOTICE: Risk of product or property damage. The location of the cabinet is critical. Make sure the door
will clear all obstacles (such as a faucet or light fixture), and obstacles behind the finished wall will not be
damaged during the cutting and/or drilling process.
IMPORTANT! Reroute any electrical wires or water supply piping from the wall cavity. If you encounter
drain or vent piping or if your wall is load-bearing, consult a professional before proceeding.
IMPORTANT! The cabinet is designed for either right or left door swing (except K-99011-TL).
NOTE: Recessed-Mount Installation: The wall cavity must be framed. The cabinet must be secured to the
framing studs.
Observe all local building codes.
This mirrored cabinet is for recessed- or surface-mount installations. Follow the instructions that
apply to your chosen installation.
The appearance of your mirrored cabinet may differ from the mirrored cabinet illustrated. The
installation instructions still apply.
This installation is easiest when performed by two people.
When determining the height of the product, verify the door(s) will clear all obstacles (such as a
faucet or light fixture). A minimum distance of 3″ (76 mm) is required.
Kohler Co. 3 1267931-2-F