Installation Guide

4. Recess-Mount – Install the Cabinet
NOTE: The following instructions are for recess-mount only. For surface-mount installation, refer to the
″Surface-Mount″ sections.
If purchased, install the decorative surround before installing the mirrored cabinet. Follow the
instructions packed with the surround.
IMPORTANT! Never leave the door supported with only one hinge attached. Get assistance supporting
the door.
Open and remove the door(s). While supporting the door, remove the screws from the bottom hinge
first.
With assistance, place and hold the cabinet into the cutout.
Mount the cabinet to the framing studs using the screws provided through each of the four
mounting holes.
Decorative
Surround
(Optional)
1267931-2-F 8 Kohler Co.