Installation Guide

IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed, including the following:
Read all instructions before using or installing this product.
WARNING: Risk of electric shock. Grounding is required for the outlets within the power box.
Connect only to a circuit protected by a Class A Ground-Fault Circuit-Interrupter (GFCI)* which
protects against line-to-ground shock hazard. Use 120 V, 15 A service.
WARNING: Risk of electric shock. A qualified electrician must route all electrical wiring for the
product. Improper installation will create an electrical hazard and may not comply with local
building and electrical codes.
WARNING: Risk of electric shock. Turn the electricity off at the circuit breaker or fuse box before
moving, testing, cleaning, or repairing this product. When unplugged, the electric supply will no
longer be electrically live, which will eliminate the risk of electric shock.
CAUTION: Risk of electric shock. Risk of electric shock. Electrical wiring may need to be
relocated.
NOTICE: Follow all local building, electrical, and plumbing codes.
IMPORTANT! A dimmer switch is required. This product is compatible with most residential dimmers
intended for incandescent and dimmable LED bulbs. For optimal dimming performance, a programmable
digital fade dimmer intended for LED lighting with a minimum rating of 150 W is recommended.
*Outside North America, this device may be known as a Residual Current Device (RCD).
SAVE THESE INSTRUCTIONS
Specifications
Electrical Service
Light 120 V, 60 Hz, 0.8 A
Tools and Materials
Stud
Finder
Dimmer
Switch
Plus:
• Wire Cutter/Stripper
• Assorted Drill Bits
1292979-2-A 2 Kohler Co.