Dimensions Guide

Features
•
Audio amplifier with Bluetooth connectivity for wireless streaming
of audio input.
•
Reads your music or audio preferences and selections from
any Bluetooth enabled device.
•
Designed for use with the DTV+ digital system but can also be
used as a standalone Bluetooth enabled amplifier.
•
Connects with up to four Kohler SoundTile
®
water resistant
speakers (or any standard 4 or 8 ohm speakers).
•
Standby mode.
•
User definable device name and PIN code option when used
with DTV+ digital system.
•
Two 3.5mm input jacks for wired audio input.
•
One 3.5mm line out jack.
Codes/Standards
•
Screw terminal block for two to four speakers.
None Applicable
•
One port for connection to DTV+ System Controller.
•
One jack for power cord connection.
See website for detailed warranty information.
Material
*The BLUETOOTH® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Kohler Co. is under license. Other
trademarks and trade names are those of their respective owners.
•
Premium material construction for durability and reliability
Installation
•
Supplied with rubber feet for locating on a countertop or shelf
or can be wall mounted (mounting bracket and screws included).
Optional Accessories
K-99693 Digital Interface
K-99694 Interface Mounting Bracket
K-99695 System Controller Module
K-8033 Speaker (Pair)
Loose component/s: Power supply with universal plug-in adapters
for NA, UK, EU, SAA, 5.75 FT(1.75 M) cord, 6 FT(1.83 M) RJ45
cable, Brackets for wall mounting, Connector for speaker wires
for 2-4 speakers , Screws, and Drywall anchors.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
7-28-2017 08:50
DTV+
™
Amplifier Module
K-99696