Use and Care Manual

Operation (cont.)
K - Nozzle Clean: Press the ″NOZZLE CLEAN″ icon to start the
nozzle and spray wand cleaning cycle. During the ″NOZZLE
CLEAN″ cycle, the nozzle will move back and forth three times,
and stop in the fully extended position. You can then manually
clean the nozzle and spray wand. See the ″Clean the Spray
Wand″ section for detailed nozzle and spray wand cleaning
instructions.
System Locks - With the seat unoccupied, press and hold the
″WATER/DRYER TEMP″ icon for more than 3 seconds to lock the
″WATER/DRYER TEMP″ feature from further use. To unlock,
press and hold the ″WATER/DRYER TEMP″ icon for more than 3
seconds again. With the seat unoccupied, press and hold the
″SEAT TEMP″ icon for more than 3 seconds to lock the ″SEAT
TEM″ feature from further use. To unlock, press and hold the
″SEAT TEM″ icon for more than 3 seconds again.
Spray Wand Oscillation - When either the
″CLEANSING/OSCILLATING″ or ″BIDET/OSCILLATING″
features are running, press either icon a second time to start back
and forth spray wand oscillation. You can press either icon a third
time to stop spray wand oscillation.
Forced ″On/Off″ - If the seat and toilet sizes are not compatible,
the seat sensor may not detect when the seat is occupied. You can
override the sensor by pressing and holding the spray wand
″FORWARD″ icon for more than 3 seconds. You can then turn on
and off the seat features without relying upon sensor activation.
1321456-5-A 6 Kohler Co.