Supplementary Manual

6.3
Section 6
Lubrication System
6
6. Fill the crankcase with the recommended oil
to the FULL mark on the dipstick. See Figure
6-4. Always check the oil level with the dipstick
ȱȱȱǯȱȱȱȱȱȱ
when checking oil level.
ȱ ŝǯȱ ȱȱȱęȱȦȱȱȱ
securely.
8. Test run the engine to check for leaks. Stop the
engine, allow a minute for the oil to drain down,
and recheck the level on the dipstick. Add more
oil, as necessary, so the oil level is up to, but not
over the FULL mark.
Splash Lubrication System
Operation
This engine uses splash lubrication to deliver oil for
internal lubrication. The governor gear, located near
ȱĴȱȱȱȱǰȱȱȱȱȱȱȱȱ
that dip into crankcase oil and splash it onto internal
engine parts.