Installation Guide (Handshower)

1. Install the Handshower Hose
Run cold and hot water through the shower outlet to flush out
dirt and debris.
Insert the screen washer into the end of the inlet of the
handshower.
Thread the hose collar onto the inlet.
Thread the hose nut to the shower outlet.
Wrench tighten the hose nut to the shower outlet. Do not
overtighten.
2. Installation Checkout
Turn on the shower valve (not shown).
Check for leaks at each end of the handshower hose and the inlet
of the handshower. Adjust as necessary.
If applicable to your model, rotate the outer ring of the
handshower to verify smooth operation of the spray options.
Turn off the shower valve.
Handshower
Screen Washer
Handshower Hose
To Shower Outlet
Inlet
Hose Collar
Hose Nut
Outer
Ring
Kohler Co. 3 1044525-2-E