Spec Sheet

MKTG000243_REV-B / 100010860

QwikProducts™, QwikHurricane™ Pad are trademarks of Mainstream Engineering Corporation® Rockledge, Florida 32955, (321) 631-3550

Mainstream Engineering Corporation®

1-800-866-3550

www.qwik.com

MADE IN THE USA

Rated for 180 mph Hurricane Winds

QwikPad

for Generators

QwikPad

for Generators

The Florida Building Code compliant generator support pad is lightweight when purchased, but weighs enough to meet code requirements of 180

mph + wind loading when lled with water and secured with stainless steel mounting bolts (supplied). Each pad includes a unique gelling agent

that, once water is added, forms a solidus gel.

FLORIDA BUILDING CODE NOTICE

This product meets the following building code requirements:

1. Mechanical Vol., Sect. 304.10 Clearances from Grade – This product provides 5” of clearance above adjoining grade.

2. Mechanical Vol., Sect. 301.15 Wind resistance – Load combinations in accordance with the Florida Building Code, Building Vol. – Ch. 16 and

ASCE 7 – Ch. 2.

Wind pressure calculations performed per Florida Building Code- Ch. 16 and ASCE 7 - Ch. 29. For the most up-to-date documentation, visit our

website, www.qwik.com/qwikpad4gen or call 1-800-866-3550.

Florida Product Approval

#FL27646

QwikPad®

for Generators P/N

Description of Generator Model to be mounted

QT8200 Universal Pad (includes hardware for Generac/Honeywell, and Kohler)

QT8210 For Briggs and Stratton® 17/20 kW Steel Enclosure Generators (hardware included)

QT8220 For Briggs and Stratton® 20 kW Aluminum Enclosure Generators (hardware included)

QT8230 For Generac/Honeywell® 9-24 kW Generators (hardware included)

QT8240 For Kohler® 14/20 kW RES/RCA Generators (hardware included)

MKTG000266_REV-f / 100010861

Generac® is a registered trademark of Generac Power Systems, Inc., Honeywell® is a registered trademark of Honeywell International, Inc.

and is licensed for use by Generac Power Systems, Inc., Briggs and Stratton® is a registered trademark of Briggs and Stratton, Kohler® is

a registered trademark of Kohler Co., QwikProducts® and QwikPad® are registered trademarks of Mainstream Engineering Corporation®

U.S. Patent #10,557,589 and other Patents Pending

Mainstream Engineering Corporation®

1-800-866-3550

www.qwik.com

MADE IN THE USA

For more details or information about the QwikPad

for Generators

visit www.qwik.com/qwikpad4gen/ or email info@qwik.com

This product has been tested by a nationally recognized, independent research and development

laboratory and deemed compliant with Section 4.1.4 and Section A.4.1.4.1.2 of the Annex of NFPA

37 (2018), Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines.