Installation Guide

1. Faucet Installation
For installations using the 3-hole escutcheon with undercover:
Slide the undercover over the faucet supply hoses and the hose
outlet. Apply plumbers putty or other sealant to the underside of
the undercover according to the putty manufacturer’s
instructions.
For installations using the single-hole escutcheon: Slide the
O-ring over the faucet supply hoses and place into the groove in
the underside of the faucet body (not shown).
For all installations: Feed the faucet supply hoses and hose outlet
through the sink hole.
Slide the bracket and washer over the stud.
Thread the nut onto the stud and tighten to secure the faucet.
2. Install the Handspray
Apply a bead of plumbers putty or other sealant to the underside
of the spray holder according to the manufacturer’s instructions.
Insert the spray holder into the sink hole.
From under the sink, securely hand tighten the nut.
Remove any excess putty or sealant.
Insert the handspray hose through the spray holder.
Connect the hose to the hose outlet and tighten.
Escutcheon
Faucet
Sink
Stud
Undercover
Apply
plumbers
putty.
Bracket
Washer
Nut
Supply
Hoses Inlets
Hose Outlet
Sink
Apply
plumbers
putty.
Handspray
Handspray
Holder
Nut
Supply
Hose
Hose
Hose
Outlet
Kohler Co. 3 1018338-2-C