Installation Guide

3. Install the Supplies

CAUTION: Risk of restricted waterﬂow and product damage.

Use extreme care when bending the supply hoses to avoid

kinking and twisting. Hoses must not be taut after installation.

NOTE: If the sink is not installed, install it at this time. Be sure to

follow all instructions packed with the sink.

NOTE: If the sink installation requires that you coil the supply hoses

to obtain a good connection, maintain an inside coil diameter of at

least 3″ (7.6 cm).

Position the hot and cold water supplies to not interfere with

other hoses.

Connect the supply hoses to the supply stops. Left is hot, right is

cold.

Tighten all connections.

3" (7.6 cm)

or Larger

Cold

Hot

1018338-2-C 4 Kohler Co.