Installation Guide

5. Water Temperature Adjustments
Remove the plug button, setscrew, handle, and bonnet.
Reposition the indexer to stop the valve stem at the desired
maximum temperature.
Place the handle onto the valve stem. Do not secure.
Turn the handle to full hot and check the water temperature.
Repeat the above procedures until the desired temperature is
reached.
Reinstall the bonnet and handle onto the faucet body. Secure with
the screw.
Reinstall the plug button.
Bonnet
Handle
(Styles
vary)
Indexer
Splines
Valve Stem
Setscrew
Plug
Button
1018338-2-C 6 Kohler Co.