Installation Guide

2. Connect the Electrical Wires
DANGER: Risk of personal injury. To avoid possible electrical shock, the outlet
box must be properly grounded.
Attach the bare copper ground wire from the fixture to the ground wire (green or
bare wire) of the outlet box.
Fasten the ground wires together with a plastic wire nut and wrap with electrical
tape.
Attach the neutral wire (white) from the fixture to the neutral wire (usually white)
of the outlet box.
Fasten the neutral wires together with a plastic wire nut and wrap with electrical
tape.
Attach the hot wire (black) from the fixture to the hot wire (usually black) of the
outlet box.
Fasten the hot wires together with a plastic wire nut and wrap with electrical
tape.
Verify all plastic wire nuts are securely fastened and wire strands are not exposed.
Carefully place the wire connections neatly into the outlet box.
Position the back plate of the fixture over the mounting plate.
Carefully place the wire connections neatly behind the back plate.
Connecter les câbles électriques
DANGER: Risque de blessures corporelles. Afin d’éviter un risque
d’électrocution, le boîtier de prises doit être proprement mis à la terre.
Attacher le câble de terre dénudé en cuivre de l’appareil au câble de terre (vert ou
dénudé) du boîtier de prise.
Attacher les câbles de terre ensemble avec un écrou câble en plastique et
envelopper de ruban isolant.
Attacher le câble neutre (blanc) de l’appareil au câble neutre (normalement blanc)
du boîtier.
Ground
Terre
Tierra
Neutral
Neutre
Neutro
Hot
Chaud
Vivo
Fixture/Appareil/Unidad
Bare/Nu/Desnudo
White/Blanc/Blanco
Black/Noir/Negro
White/Blanc/Blanco
Black/Noir/Negro
Green or Bare Copper
Vert ou cuivre nu
Verde o cobre desnudo
Outlet/Sortie/Caja eléctrica
Plastic Wire Nut
Écrou câble en plastique
Tuerca de plástico para
cables
1098875-2-A 6 Kohler Co.