Specification

Technical Information
Fixture:* basin area top area weight
Bathing
well
42″ (106.7 cm) x
25-1/2″
(64.8 cm)
63″ (160 cm) x
31-1/2″ (80 cm)
160 lbs.
(73 kg)
water depth to rim 19-1/4″ (48.9 cm)
capacity 96 gal. (363.4 L)
* Approximate measurements for comparison only.
Cut-out template 1016369-7
Pump Heater Voltage Frequency Amperage
2 HP 1.5 kW 240 V 50/60 Hz 15 A
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circut-Breaker (ELCB):
Pump/control 220-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Pump/piping protrudes beyond rim (see below).
Floor support under whirlpool must provide for a minimum of
1400 lbs. (635 kg).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
12-3/16"
(31 cm)
3-15/16"
(10 cm)
23"
(58.4 cm)
46"
(116.8 cm)
1-3/16" (3 cm)
23-3/16"
(58.9 cm)
22"
(55.9 cm)
2-3/4" (7 cm) Max.
6-1/2"
(16.5 cm)
6"
(15.2 cm)
4" (10.2 cm)
1-1/2" O.D.
3-3/8" (8.6 cm)
1-3/8"
(3.5 cm)
6" (15.2 cm)
72" (182.9 cm)
7/16" (1.1 cm)
5-1/2"
(14 cm)
Pump/Piping Protrudes
Beyond Rim
Note:
Pump/Control Access
34" (86.4 cm) W. x
15" (38.1 cm) H
No change in measurements with drain shown. (K-7202)
Product Diagram
PURISTTM
PURISTTM BATH WHIRLPOOL WITH SPA/MASSAGE PACKAGE
Page2of2
1023259-4-
C