Specification Sheet

Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
220-240 V, 20 A, 50/60 HzPump, Heater:
Technical Information
All product dimensions are nominal.
Pump/piping protrudes beyond rim (see drawing).
Drop-in, Under-mountInstallation:
EndDrain location:
43" x 26-1/2" (1092 mm x 673 mm)Basin area, bottom:
55" x 36" (1397 mm x 914 mm)Basin area, top:
160 lbs (72.6 kg)Weight:
43 lbs/ft² (209.9 kg/m²)Minimum floor load:
19-1/4" (489 mm)Water depth:
96 gal (363.4 L)Water capacity:
Top-mount/Under-mount, 1016369-7,
required, included
Template:
Pump: 240 V, 11 A, 50/60 Hz
Heater: 240 V, 6.25 A, 1500 W
Electrical component
rating:
VariablePump speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 04:33
Purist
®
6' Whirlpool Bath
K-1110-M